DTF Printing 30cm 60cm Cold Peel Hot Peel Single Side Matte PET Film DTF Roll
Composition :DTF PET film is made from polyethylene terephthalate, a polyester material known for its strength, transparency and dimensional stability. PET is a commonly used thermoplastic polymer in a variety of applications due to its excellent mechanical and thermal properties.
Use :DTF PET film is used as a substrate or carrier for patterns or inks in the DTF printing process. It acts as a temporary layer to transfer ink or design to the fabric during activation.
Printing process :DTF PET film is usually used in combination with DTF ink and hot melt adhesive powder. Use an appropriate inkjet printer or other digital printing method to print the design or pattern onto the PET film. The ink is then dried or cured, depending on the specific ink formulation.
Transfer to fabric: Once the design is printed and dried on the PET film, place it on the fabric with the printed side facing down. Heat and pressure activate the hot melt adhesive powder, which binds the ink to the fabric. The PET film acts as a carrier, allowing ink to be transferred from the film to the fabric during the activation process.
Removal of PET film: After an activation process, the PET film is stripped from the fabric, leaving the transferred ink or pattern behind. The ink sticks to the fabric permanently, creating a long-lasting and vibrant print.
Double Sided Matte PET Film Product Description
| Product Specification | Thickness | 0.075mm |
| Length | 100m |
| Size | A4, A3, A3+ |
| Finished Product | 0.075mm*600mm*100m/roll |
| Operating Conditions | Press Temperature | 130℃-160℃ |
| Press Time | 8-15 seconds |
| Pressure | 0.3-0.5mpa |
| Washing Resistance | Washable Temperature | 45℃-60℃ |
Packaging and Storage Conditions:
| Packaging | 1000sheets/2000sheets a ctn |
| Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year |
Why did you choose us
1. Professional R & D team, a new enterprise integrating production, R & D and sales
2. Good service and short delivery time
Applications of DTF PET film
Ink curing: Allow the printing ink on the DTF PET film to dry or cure completely. The specific curing requirements will depend on the ink type and the manufacturer's recommendations. It may involve air drying or the use of heat or UV curing methods.
Fabric preparation: Ensure that the fabric is clean, dry, non-polluting and wrinkle-free. Pre-washing the fabric may be necessary to remove any slurry or chemicals that may interfere with the printing process.
Hot press transfer: The printing side of the DTF PET film is placed on the fabric face down. Use a hot press for heat and pressure. The heat activates the bonding layer on the PET film, which transfers the ink from the film to the fabric. The pressure ensures proper adhesion and ink penetration into the fabric fibers.
Cooling and peeling: After the transfer process, allow the fabric to cool down, which helps the ink set. Once cooled, carefully peel the DTF PET film from the fabric, leaving the transferred design. Be careful when peeling to avoid damaging the print.
Post-treatment (optional): Depending on ink type and fabric requirements, additional post-treatment steps may be required. This can include heat curing, washing, or other finishing processes to improve the durability and washable print.
FAQ
Q1:What is the MOQ?
A4: 2000pcs
A3: 1000pcs
30cm: 4rolls
60cm: 2rolls
Q2:What about the bulk specifications?
The thickness is 0.075mm, length is 100m per roll.
The width has 30cm, 33cm, 60cm.
We also have the A3, A4, A3+ and A4+.
Product Tags:
|
|
30cm 60cm Dtf Printing Film Cold Peel Hot Peel Single Side Matte Pet Roll Images
|
